The PTR9818PA ultra-low power Bluetooth 5 ready multiprotocol System on Module based on the nRF52840 from Nordic Semiconductor,, designed for longer distance communication, built-in maximum +20dBm RF output. The module can support Bluetooth 5.2 by upgrading the protocol stack. The module with an ARM® Cortex™ M4F 32 bit processor, 1MB Flash/256KB RAM, embedded 2.4GHz transceiver, and integrated antenna, provide a complete solution with no additional RF design, Bluetooth 5, ANT/ANT+, 802.15.4 and 2.4GHz proprietary multiprotocol support, allowing faster time to market, while simplifying designs, reducing BOM costs, also reduce the burden of Regulatory approvals to enter the world market. Making you more quickly into the Bluetooth smart application and remove the worries.

More highlights,here.

ARM Cortex M4F

Bluetooth 5, ANT/ANT+, and 2.4GHz proprietary, 802.15.4 Thread and Zigbee

MAX translation power +20dBm

128-bit AES HW encryption

Rich set of Peripheral

46 General purpose I/O pins(reserve 2 I/O for RF front-end control)

2 UART (with CTS/RTS and DMA)

Over-the-Air (OTA) firmware updates available

Product parameters
Product model PTR9818PA
MCU 32 bit Cortex-M4F@64M
Serial wire debug SWD
Transmitting power +20dbm MAX
Receiving sensitivity -103dBm@BLE 125kbps(long range), -96dBm@BLE 1M
Communication frequency band 2.402 GHz-2.480 GHz
Working voltage 2.7~3.6V
Antenna type PCB antenna
USB Interface  
Working Temperature -25℃~+85℃
  • Contact Us
  • Add:Shekou Wanggu, #1031 Nanhai Avenue, Nanshan District, Shenzhen City, Guangdong Province, China

Wechat mall